Lakewood’s Fastest-Cure Floor Coating
Polyaspartic floor coatings cure in hours, not days. Drive back in the same afternoon. UV-stable, hot-tire proof, and rated for Colorado’s freeze-thaw cycles. Elevated Epoxy Co installs polyaspartic systems across Lakewood and Jefferson County.
Why Lakewood Homeowners Choose Polyaspartic
Polyaspartic is a next-generation aliphatic polyurea. It outperforms standard epoxy on every durability metric: cure speed (6 to 8 hours vs. 24 to 72), UV resistance (won’t yellow in Lakewood’s 300-plus days of sun), chemical resistance, and hot-tire resistance. For Lakewood garages that see daily use, same-day return to service is the deciding factor.
Epoxy and polyaspartic aren’t competing products. Most high-performance floor systems combine both: an epoxy base coat (better adhesion, moisture tolerance, thicker film build) with a polyaspartic topcoat (UV stable, faster cure, harder surface). A polyaspartic-only system skips the epoxy base and goes direct-to-substrate. Both approaches are valid depending on your concrete condition and budget.
Polyaspartic vs Epoxy: What Matters for Lakewood
Lakewood sits at 5,430 feet. Freeze-thaw cycles are real. UV exposure at elevation is roughly 25 percent more intense than sea level. Standard epoxy topcoats yellow and chalk under Colorado UV. Polyaspartic topcoats are aliphatic, meaning the chemical structure resists UV degradation. After five years, a polyaspartic-topcoated floor in Lakewood still looks like install day. An epoxy-only floor develops an amber tint.
What We Install in Lakewood
- Full polyaspartic system (direct-to-substrate, no epoxy base) for new or sound concrete
- Epoxy base + polyaspartic topcoat hybrid (most popular Lakewood residential system)
- Polyaspartic with full-broadcast flake for texture and slip resistance
- Clear polyaspartic sealer over existing decorative concrete or polished floors
- Commercial-grade polyaspartic for Lakewood shops, warehouses, and commercial bays
- Anti-slip aluminum-oxide grit broadcast into topcoat
Lakewood Polyaspartic Pricing
Standard epoxy-base plus polyaspartic-topcoat system for a 2-car Lakewood garage (400 to 500 sq ft): $2,800 to $4,200. Polyaspartic-only system (skip the epoxy base): similar cost, sometimes 5 to 10 percent lower on materials. Premium metallic polyaspartic with color-shift effect: $4,200 to $5,800.
Concrete prep is always quoted separately based on what we find on-site: grinding extent, crack count, moisture readings, and existing coatings. Most Lakewood residential garages fall in the standard range. Commercial or industrial work is priced per square foot on a walk-through.
Serving Lakewood and Jefferson County
We cover Lakewood, Arvada, Golden, Wheat Ridge, Edgewater, Ken Caryl, and throughout Jefferson County. Most Lakewood installs are completed in a single day: morning prep, body coat, flake broadcast if specified, polyaspartic topcoat, walk-through by mid-afternoon. BBB Verified. Micro Cement Certified. Family-owned out of Parker.
Call (720) 635-0282Schedule Your Lakewood Walk-Through
On-site look at your floor: no pressure. We measure, check moisture, and walk through options. Same-day scheduling most weeks.
(720) 635-0282Mon-Sat 7am-6pm · Jefferson County
Our Guarantees
- Lifetime warranty on coating system
- BBB Verified A+ rating
- Micro Cement Certified
- Same-day drive-in after install
Frequently Asked Questions
How long before I can park in the garage after polyaspartic?
Light foot traffic after 4 to 6 hours. Full vehicle traffic same evening or next morning depending on temperature and humidity. Polyaspartic cure is dramatically faster than traditional epoxy. We’ll give you a specific window at walk-through based on your install date forecast.
Does polyaspartic hold up in Lakewood winters?
Yes. Polyaspartic has a wider installation and service temperature range than standard epoxy. The aliphatic chemistry resists freeze-thaw stress better than aromatic epoxies. We install year-round in Jefferson County when concrete temps stay above 35°F and rising.
Can polyaspartic go over my existing epoxy floor?
Sometimes. It depends on the condition of the existing coating: how well it’s bonded, whether it’s delaminating at edges, and what’s under it. We do a bond-test adhesion check on existing coatings before quoting. If the existing coat is solid, we can grind and recoat. If it’s failing, full removal is the right call.
What’s the difference between polyaspartic and polyurea?
Polyaspartic is a type of aliphatic polyurea. Both terms describe the same chemistry class. In flooring, “polyaspartic” usually refers to the slower-reacting formulation used as floor topcoats (enough open time to work). “Polyurea” in spray applications cures in seconds. For garage floors in Lakewood, polyaspartic is the right product.
How much does polyaspartic flooring cost in Lakewood?
Standard 2-car garage with epoxy base and polyaspartic topcoat runs $2,800 to $4,200 in Lakewood. Polyaspartic-only systems are comparable in price. Premium metallic polyaspartic finishes run $4,200 to $5,800 for a 2-car. Pricing reflects prep complexity, floor size, and topcoat spec. We send an itemized breakdown with every on-site look.
More Lakewood Flooring Services
Polyaspartic is one system. Explore the full range we offer in Lakewood and Jefferson County.